Loghouse cross-section and delivery specification

PALKTARE DELIVERY SPECIFICATION FOR LOG HOME PRODUCT GROUP - SET OF PREFABRICATED WOODEN MATERIALS AND DETAILS

Prefabrication:
LV - Finished
PM - Pre-cut
PV - Ready for mounting

P+ - With extra supply in length
PCS - Piece
RM - Running meters

J. DRAWINGS AND TECHNICAL DOCUMENTATION
J.1. Architectural drawings:
J.1.1. Foundation plan
J.1.2. Elevations
J.1.3. Floor plans
J.1.4. Cross-section
J.1.5. 3D

J.2. Constructive part:
J.2.1. Detail drawings for log walls and log bearing construction
(P.1.) with assembly and packing plans
J.2.2. Floor and ceiling beams plan
J.2.3. Rafters plan
J.2.4. Frame walls framework plans
J.2.5. Terrace and balcony beams plans
J.2.6. Typical assemblies, details and layouts of the walls
J.2.7. Packing list
J.2.8. The specification of doors and windows
J.2.9. Stair drawings

J.3. Building static calculation

P. LOG PART
P.1. Log wall: prefabricated, grooved, pivoted, jointed corners, marked up

Massive logs:
P.1.1. Log wall thickness 92mm PV
P.1.2. Log wall thickness 142mm PV

Vertically laminated logs:
P.1.3. Log wall thickness 88 mm PV
P.1.4. Log wall thickness 136 mm PV

P.2. Load bearing log-structures/constructions with metal accessories in delivery set
P.2.1. Ceiling log beams with metal jointers PV
P.2.2. Trimmer joist with covert jointer PV
P.2.3. Log buttress (post, pillar) with settling bolt (adjusting screw) PV
P.2.4. Compound beam (log girder) with metal accessories in set PV
P.2.5. Laminated beams (purlin) PV

P.3. Placement/assembling means and metal accessories. PCS/RM

P.4. Additional accessories:
P.4.1. Bituminous felt (moisture barrier) between log part and foundation RM
P.4.2. Impregnated timber between foundation and log part RM
P.4.4. Fixing angle with coash screws and anchor nails (BMF) PCS
P.4.5. Specific tools: sledge-hammer and F-shaped crowbar PCS

P.5. Additional processing:
P.5.1. Holes for electric cables in log walls PCS
P.5.2. Hand-hewed surface by special order RM
 
LS. MATERIALS for ADDITIONAL INSULATION of OUTER LOG WALLS
LS.1. Framework cc=600 P+/RM
LS.2. Metal sliding brackets PCS
LS.3. Paneling:
    LS.3.1. Panel board RM
    LS.3.2. Log panel RM
LS.4. Fillet for internal edge (corner skirting list) RM
LS.5. Fillet for external edge (corner skirting list) RM
 
F.  FLOOR
F.I. Floor for concrete slab foundation (panel/mat, base slab)
F.1. Floor boards P+/RM
F.2. Floor joists cc=600 P+/RM
F.3. Floor skirting list RM

F.II. Floor for strip (continuous footing) foundation
F.1. Floor boards P+/RM
F.4. Floor joists cc=600 P+/RM
F.5. Fixing lath/batten for floor beams P+/RM
F.6. False inserted floor boards RM
F.7. Laths/boards for fixing false flooring RM
F.3. Floor skirting list RM
 
L.  INSERTED CEILING
L.I. Inserted ceiling with visible log beams
L.1. Floor boards P+/RM
L.2. Floor joists cc=600 P+/RM
L.3. Ceiling paneling RM
P.2.1. Ceiling beams (visible logs, mortised with log-wall, see P.2.) PV
L.5. Ceiling fillet RM
L.6. Skirting board RM
L.7. Fixing lath/batten for floor joists RM

L.II. Inserted ceiling with invisible beams
L.1. Floor boards P+/RM
L.2. Floor beams cc=600 PM/P+
L.3. Ceiling paneling RM
L.5. Ceiling fillet RM
L.6. Skirting board RM
L.7. Fixing lath/batten for floor joists RM
 
K.  ROOF
K.I. Roof construction under the roof tiles or roof sheet
K.1. Roof batten -lathwork RM
K.2. Fixing lath for K.3. RM
K.3. Roof film (membrane) - under layer M2
K.4. Aeration/ventilation batten RM
K.8. Roof paneling board (in addition agreement) RM
K.5. Rafters PV/PM
K.6. Boards between rafters with fixing batten RM/P+
P.2.4. Purlins (will be delivered with log part, see P.2.) PV<
K.9. Fascia boards RM
K.10. Eaves soffit:
    K.10.a. Eaves boards on the top of the rafters (if visible rafters) RM
    K.10.b. Eaves soffit cladding boards (if invisible rafters) RM
K.11. Ceiling paneling RM
K.12. Metal accessories accordance in case of need: PCS/RM
(wind brace, angles, anchor nails, bolts, metal plates with nails, sliding brackets etc)
K.13. Skirting boards/lists RM
Wooden materials for additional insulation for the roof construction insulation thickness over 200mm
K.14. Filling laths cc=600 RM
K.15. Cross laths cc=600 RM

K.II. Roof construction under the roof bituminous felt (roof) shingles
BS.1.1-1.6 Bituminous shingles ICOPAL in set (felt shingles, felt strips
for edge of roof, ridge plate, triangular batten, eaves flashing, impregnated
covering boards) PV/PCS/RM
K.15. Under layer M2
K.8. Roof paneling board RM
K.4. Aeration/ventilation batten RM
K.5. Rafters PV/PM
K.6. Boards between rafters with fixing list RM/P+
P.2.4. Purlins (will be delivered with log part, see P.2.) PV
K.9. Fascia boards RM
K.10. Eaves soffit:
    K.10.a. Eaves boards on the top of the rafters (if visible rafters) RM
    K.10.b. Eaves soffit cladding boards (if invisible rafters) RM
K.11. Ceiling paneling RM
K.12. Metal accessories accordance in case of need: PCS/RM
(wind brace, angles, anchor nails, bolts, metal plates with nails, sliding brackets etc)
K.13. Skirting boards/lists RM
Wooden materials for additional insulation for the roof construction insulation thickness over 200mm
K.14. Filling laths cc=600 RM
K.15. Cross laths cc=600 RM
 
R.  BALCONY
R.1. Impregnated milled balcony floor boards P+/RM
R.2. Impregnated balcony floor beams cc=600 PM/P+>
R.3. Impregnated supporting batten for beams P+/RM
R.4. Railing/banister:
    P.1. Log railing (will be delivered with log part, see P.1.) PV
    R.4.2. Railing from profile laths PCS
R.5. Impregnated cover rail P+
 
C.  TERRACE
C.1. Impregnated milled balcony floor boards P+/RM
C.2. Impregnated balcony floor beams cc=600 PM/P+
C.3. Impregnated supporting batten for beams P+/RM
C.4. Railing/banister:
    P.1. Log railing (will be delivered with log part, see P.1.) PV
    C.4.2. Railing from profile laths PCS
C.5. Impregnated cover rail P+
 
SS. INTERNAL FRAMED WALLS
SS.1. Frame cc=600 P+/RM
SS.2. Panel:
    Panel board RM
    Log panel RM
SS.3. Fillet for internal edge (corner skirting list) RM
SS.4. Fillet for external edge (corner skirting list) RM
 
VS. EXTERNAL FRAMED WALLS ON GABLES AND DORMERS
VS.1. Frame cc=600: P+/RM
VS.2. External panel:
    VS.2.1. Vertical panel board RM
    VS.2.2. Horizontal log panel RM
VS.3. Internal panel:
    VS.3.1. Panel board RM
    VS.3.2. Log panel RM
VS.4. Fixing laths for wind barrier RM
VS.6. Cross laths (for vertical panel board) RM
 
S. SAUNA WOODEN MATERIALS
S.1. Sauna internal and ceiling panel RM
S.2. Bath-house platform board RM/PV
S.3. Ground laths for paneling cc=600 RM
S.4. Cross laths (only for vertical panel board) cc=600 RM
S.5. Glazed door or glazed door in wooden frame PCS
 
A. WINDOWS IN SET                                                             LV/PV
The type of window:
AS. Inwards opening windows
AV. Outwards opening windows
Glass division: Bar- frames packed through the packet or removable bar-frames
Window finishing: Kiefer (Remmers)
Double-glassed/heat proof: k=1,4W/M2K (2k4+4sel-18)
A.1. Frame boards, glue shell or hengewidening PM
A.2. Inside cover boards PM
A.3. Outside cover boards PM
A.4. Drip mould or drip board PV
 
RU. BALCONY DOORS IN SET                                                 LV/PV
The type of balcony door:
RUS. Inwards opening balcony doors
RUV. Outwards opening balcony doors
Glass division: Bar- frames packed through the packet or removable bar-frames
Balcony door finishing: Kiefer (Remmers)
Double-glassed/heat proof: k=1,4W/M2K (2k4+4sel-18)
RU.1. Frame boards, glue shell or hengewidening PM
RU.2. Inside cover boards PM
RU.3. Outside cover boards PM
RU.4. Drip mould or drip board PV
 
AK. SKYLIGHT WINDOWS VELUX WITH PLACEMENT SET       LV/PV
 
VU. EXTERNAL DOORS                                                            LV/PV
The type of external door
VUS. Inwards opening balcony doors
VUV. Outwards opening balcony doors
Glass division: Bar- frames packed through the packet, removable bar-frames or no windows
External door finishing: Kiefer (Remmers)
Double-glassed/heat proof: k=1,4W/M2K (2k4+4sel-18)
VU.1. Frame boards, glue shell or hengewidening PM
VU.2. Inside cover boards PM
VU.3. Outside cover boards PM
VU.4. Drip mould or drip board PV
 
SU. INTERNAL DOORS                                                            LV/PV
SU. Internal doors with lock corps
SU.1. Frame board or glue shell PM
SU.2. One side cover boards PM
SU.3. Other side cover boards PM
 
T. STAIR                                                                                 LV/PV
ST. Inner stairs with one side railing

 
PK. PACKAGE
PK.1. Trailer package Maximum weight 4000 kg.
PK.2. Container package
 
LT. SUPPLEMENTAL SERVICES (in addition agreement)
INST. Service of supervisor

 
LM. SUPPLEMENTAL MATERIALS (in addition agreement)
ISOL. The material for insulation
    ISOL.1. Stone wool
    ISOL.2. Glass wool
TT. Material for wind barrier
NT. Material for moisture insulation
VT. Impregnated materials for outer stair P+/RM